בקבוקי פלסטיק עגולים + מכסה הברגה/לחיצה
כוסות PP כיול חרוט
מזרק חד"פ (ללא מחט)
מזרק חד"פ +מחט
יחיד
כפול
ניירות סינון
Levo Plus Pipette Filler Features Full volume range of 1-100ml Easy to one-handed operation Lightweight, ergonomic designs allow longer, fatigue-freepipetting Lithium-ion battery offers long runtime charge and no batterymemory problems Low battery indication Powerful motor fills a 25ml pipette in＜5 seconds Supplied with integral but replaceable 0.45um filter Can be used while recharging Large LCD display provides visual confirmation of remainingbattery charge and speed settings. Eight speeds are available for aspirate and dispense liquid. Ifthe dispense button is pressed only up to a point where a check can be felt, thedispensing function will be based on the force of gravity and the liquid willsimply flow out.
Levo Pipette Controller Features Comfortable and simple to use. Precise pipetting control Robust and lightweight 1-100ml volumetric or serological pipettes can be used Uses integral and replaceable 3.0μm filter Easy to maintain and clean Five colors Autoclavable silicone pipette holder Filling and delivery are easily controlled with a small sensitive lever. The filter and adapter can be integral and replaceable
Features Lightweight and ergonomic One-hand operation Factory calibrated Volume range of 1μl to 5ml can be dispensed Maintenance-free Equipped with durable tip insertion lever Works with seven sizes of disposable, polypropylene syringes from 0.5ml to 50ml
Features Excellent chemical resistance Entirely autoclavable at 121℃ Four ranges of bottle top dispenser cover a volume range of 0.5mlto 50ml Easy to clean and maintain The optional flexible discharge tube with safety handle permitsfast and precise dispensing Made of PTFE, ETFE,FEP,BGS,PP Vapor pressure Max. 500mbar, viscosity max. 500mm2/s, temperaturemax. 40℃, density max. 2.2g/cm3 Adaptor allow fitting to standard reagent bottles DispensMate plus is supplied with S40,GL32,GL38,GL25,GL28 sizedadapters
ניתן לרכוש מדי חום עם רגלי טבליה של 100 מ"מ, 150 מ"מ , 200 מ"מ ועד 500 מ"מ
** ניתן לרכוש מדי חום רגל 50 מ"מ, 100 מ"מ , 150 מ"מ
בוחש מגנטי דיגיטלי + חימום MS7-H-PRO Digital 7' square (hotplate) Magnetic Stirrer
בוחש אנלוגי +חימום MS-H-S Analog (Hotplate) Magnetic Stirrer Features A traditional magnetic stirrer with modern design Stainless steel plates and with/without hotplate porcelain enamel surface Variable speed of motor Motor with electronic speed control, constant speed even during changes in load High magnetic adhesion, prevent the stirrer bar escape Enclosed assembly(IP42) and external rotor brushless motor guarantees long service time Safe separate circuit, automatically stop to heat when the temperature over 350℃(MS-H-S בוחש מגנטי דיגיטלי + חימום MS-H-PRO . Digital (Hotplate) Magnetic Stirrer Features of MS-H-Pro High accuracy of heating temperature controlling and the control of safe temperature Hotplate with stainless steel surface or porcelain enamel surface with excellent chemical resistance 2 adjustable safety circuits Separateness temperature sensor, protection temperature can be set Temperature sensor for heat transfer fluid and medium available(PT1000) Warning display indicating presence of any residual heat when the unit is switched off A, B, C Mode, ensure the stirring function not change due to external factors(MS-Pro) Bushing according to DIN 12878 for the use of contact thermometers פלטה מגנטית אנלוגית עם/ללא חימום - 10 מקומות. 10-Channel Analog (Hotplate)Magnetic Stirrer Features High-performance multi-position magnetic stirrer with 10 stirring position, optimum use of laboratory space Individually controlled stirring for consistency with various samples Step less speed regulation. Wide speed range: 0-1000rpm External rotor brushless motor reduces operating noises and increases motor life Variable speed of motor Electronic speed control motor provides constant speed during changes in load Inner set temperature control panel, uniform temperature distribution(MS-H-S10) Stainless steel plate with silicone films, anti-slip and anti-corrosion High Speed Micro-Centrifuge Features： User-friendly large LCD display provides all visual information Quiet and stable operation benefit lab environment Brushless motor drives quickly and effortlessly accelerates the rotor to set speed Fully autoclavable Bio-safe rotor Dual door interlock design, more safe Special double air cooling design to keep lower rotor temperature Unique temperature display to protect sensitive samples Gently braking at low speed, better separation
MiniMicro-Centrifuge Features： Powerful centrifugal force 15100 g, broad applicationrange User-friendly large LCD display provides all visualinformation Brushless motor drives quickly and effortlesslyaccelerates the rotor to set speed
Unique cooling design, minimizes rotor heating Fully autoclavable high strength aluminum alloy rotor Compact design, save valuable space High speed, low noise MicroPlate Mixer Features Compact, universal small Microplate Mixer suitable for smallvessels and 96 microtiter plates Wide range of attachments, easy installation and replacement. Continuous operation Stepless speed regulation of motor External rotor brushless motor reduces operating noises andincreases motor life
Orbital and Linear Digital Shaker
Vortex Mixer Fixed speed Model Features New vortex mixer suitable for touch or continuous operation MX-S with wide speed range: 0-2500rpm, stepless speed regulation of motor MX-S can be used for various shaking application with optional adapters for Eppendorf etc Adapters securely clicked onto appliance in any position Sturdy cast casing Specially designed silicone feet and steel base for excellent vibration damping Eccentric with oilless ball bearings
Vortex Mixer Adjustable speed Model Features New vortex mixer suitable for touch or continuous operation MX-S with wide speed range: 0-2500rpm, stepless speed regulation of motor MX-S can be used for various shaking application with optional adapters for Eppendorf etc Adapters securely clicked onto appliance in any position Sturdy cast casing Specially designed silicone feet and steel base for excellent vibration damping Eccentric with oilless ball bearings Specifications
פלטה מגנטית 10 מקומות עם/ללא חימוםMS-10/MS-H-10 10-Channel Analog (Hotplate)Magnetic Stirrer High-performance multi-position magneticstirrer with 10 stirring position, optimum use oflaboratory space Individually controlled stirring forconsistency with various samples Step less speed regulation. Wide speed range: 0-1000rpm External rotor brushless motor reducesoperating noises and increases motor life Variable speed of motor Electronic speed control motor providesconstant speed during changes in load Inner set temperature control panel, uniformtemperature distribution(MS-H-S10) Stainless steel plate with silicone films, anti-slip and anti-corrosion
פלטה מגנטית אנלוגית עם/ללא חימום - MS-S / MS-H-S Analog (Hotplate) Magnetic Stirrer
Digital (Hotplate) Magnetic Stirrer
רפרקטומטר ידני
רפרקטומטר דיגיטלי
Digital (Enhanced) Overhead Stirrer Features： Accurate stirring speed control: The control technology effectively guarantees the speedprecision. Anti-spill samples: PC control system starts up smoothly, prevent samplesoverflow. LCD real-time display: Setting value and actual value can be displayed. Real-timemonitoring torque and speed via LCD display. Overload protection: Motor would automatically stop in case of continuous overload. Setting safety circuit: Automatically cut off the circuit when motor overheating and otherexceptional circumstances, make sure using security. Extended application: PC can control and document all measuring values via RS232interface. Parameter can be set to carry out safety monitoring.
The Ultra Centrifugal Mill ZM 200 is a high speed rotor mill with unmatched performance. It is used for the rapid size reduction of soft to medium-hard and fibrous materials. The cyclone mill TWISTER is specially designed for the processing of foods and feeds for subsequent NIR analysis. The optimized form of rotor and grinding chamber generates an air jet which carries the ground sample through the integrated cyclone into the sample bottle. The air jet prevents the material from heating up, thus preserving the moisture content. The Rotor Beater Mill SR 200 is suitable for coarse and fine size reduction, either in batches or continuously. It can process dry, soft, medium-hard, organic and inorganic substances. The Rotor Beater Mill SR 300 is suitable for coarse and fine size reduction, either in batches or continuously. It can process dry, soft, medium-hard, organic and inorganic substances. The Cross Beater Mill SK 100 is suitable for coarse and fine size reduction, either in batches or continuously. It can process medium-hard and brittle materials and is easy to operate. Feed material: medium-hard, hard, brittle, tough Material feed size*: < Final fineness*: < The Jaw Crusher BB 100 is used for the rapid, gentle crushing and pre-crushing of medium-hard, hard, brittle and tough materials. The Jaw Crusher BB 200 is used for the rapid, gentle crushing and pre-crushing of medium-hard, hard, brittle and tough materials. Its variety of materials offered, including heavy-metal free steel, its efficiency and safety makes it ideal for sample preparation in laboratories and industrial plants. The Jaw Crusher BB 300 is used for the rapid, gentle crushing and pre-crushing of medium-hard, hard, brittle and tough materials. Its variety of materials offered, The Mortar Grinder RM 200 can mix and homogenize powders, suspension and pastes even with high viscosity. The RM 200 is suitable for the proper and reproducible sample preparation to analytical fineness. Cutting mills are suitable for the grinding of soft, medium-hard, elastic, fibrous, and heterogeneous mixes of products. The new cutting mill SM 200 is a powerful and easy-to-operate instrument for efficient primary and fine size reduction. Cleaning is made particularly easy. Cutting mills are suitable for the grinding of soft, medium-hard, elastic, fibrous, and heterogeneous mixes of products. The SM 100 is the budget-priced basic model among the RETSCH cutting mills. With its strong 1.5 kW drive and 1,500 rpm rotor speed the mill is particularly suitable for routine applications. Cleaning is made particularly easy. In combination with the wide choice of bottom sieves, hoppers and collecting vessels, the mill can be easily adapted to varying application requirements. The SM 100 can be bench-mounted; alternatively a convenient base frame on wheels is available. Cutting mills are suitable for the grinding of soft, medium-hard, tough, elastic, fibrous, and heterogeneous mixes of products. The new Cutting Mill SM 300 excels especially in the tough jobs where other cutting mills fail. The new knife mill GRINDOMIX GM 200 is the ideal instrument for grinding and homogenizing foods and feeds. It allows to process sample volumes up to 0.7 liters quickly and reproducibly. The new knife mill GRINDOMIX GM 300 is the ideal instrument for the grinding and homogenization of foodstuffs. It allows to process sample volumes up to 4.5 liters quickly and reproducibly. The Paddle Blender PB 100 is designed for sample preparation for subsequent microbiological food testing. The homogenization of the sample is realized by a combination of mechanical effects. The patented SMASH effect crushes the sample during the first 3 seconds with maximum speed; it is complemented by a peristaltic mixing of the sample which guarantees optimum sample preparation. In order to understand the processes which occur during grinding with ball mills (e.g. chemical reactions, phase changes), it is helpful to record the most important thermodynamic parameters: pressure and temperature. Planetary Ball Mills are used wherever the highest degree of fineness is required. Apart from the classical mixing and size reduction processes, the mills also meet all the technical requirements for colloidal grinding and have the energy input necessary for mechanical alloying processes. The extremely high centrifugal forces of the Planetary Ball Mills result in very high pulverization energy and therefore short grinding times. Planetary Ball Mills are used wherever the highest degree of fineness is required. Apart from the classical mixing and size reduction processes, the mills also meet all the technical requirements for colloidal grinding and have the energy input necessary for mechanical alloying processes. The extremely high centrifugal forces of the Planetary Ball Mills result in very high pulverization energy and therefore short grinding times. Planetary Ball Mills are used wherever the highest degree of fineness is required. Apart from the classical mixing and size reduction processes, the mills also meet all the technical requirements for colloidal grinding and have the energy input necessary for mechanical alloying processes. The extremely high centrifugal forces of the Planetary Ball Mills result in very high pulverization energy and therefore short grinding times. Planetary Ball Mills are used wherever the highest degree of fineness is required. Apart from the classical mixing and size reduction processes, the mills also meet all the technical requirements for colloidal grinding and have the energy input necessary for mechanical alloying processes. The extremely high centrifugal forces of the Planetary Ball Mills result in very high pulverization energy and therefore short grinding times. The Vibratory Disc Mill RS 200 is suitable for the extremely quick, loss-free and reproducible grinding of medium-hard, brittle and fibrous materials to analytical fineness. The instrument runs steadily and smoothly, even with heavy grinding sets, at maximum speed thanks to the new Stabilized-Plane-Drive. Thanks to its robust design, the Disc Mill DM 200 can be used under rough conditions in laboratories and pilot plants, as well as online for the quality control of raw materials. The powerful DM 200 requires only a few minutes to achieve the desired grind size. The CryoMill is tailored for cryogenic grinding. The grinding jar is continually cooled with liquid nitrogen from the integrated cooling system before and during the grinding process. The mixer mill MM 400 is a compact versatile bench-top unit, which has been developed specially for dry, wet and cryogenic grinding of small amounts of sample. The mixer mill MM 200 is a compact versatile benchtop unit, which has been developed specially for dry grinding of small amounts of sample. The demands made of particle size analysis are reflected in the requirements contained in the standard ISO 3310. In order to adapt our test sieves to these requirements, RETSCH has developed a unique manufacturing process that guarantees a previously unattained quality and consistency in sieve production (200 x 50 mm, 200 x 25 mm, 203 x 50 mm (8"x 2"), 203 x 25 mm (8"x 1")). In addition, a logistic manufacturing system makes it possible to record each and every material used in the process
The analytical sieve shakers of the series AS 200 are used in research & development, quality control of raw materials, interim and finished products as well as in production monitoring. The controllable electromagnetic drive offers an optimal adaption for every product. Sharp fractions are obtained even after short sieving times. The analytical sieve shaker AS 400 control is used in research & development, quality control of raw materials, interim and finished products as well as in production monitoring. The analytical sieve shaker AS 200 tap is used in research & development, quality control of raw materials, interim and finished products as well as in production monitoring. The analytical sieve shaker AS 450 control is used in research & development, quality control of raw materials, interim and finished products as well as in production monitoring. The controllable electromagnetic drive offers an optimal adaption for every product. Sharp fractions are obtainable even after very short sieving times. The analytical sieve shaker AS 300 control is used in research & development, quality control of raw materials, interim and finished products as well as in production monitoring. The controllable electromagnetic drive offers an optimal adaption for every product. Sharp fractions are obtained even after short sieving times. The analytical sieve shakers of the series AS 200 are used in research & development, quality control of raw materials, interim and finished products as well as in production monitoring. The controllable electromagnetic drive offers an optimal adaption for every product. Sharp fractions are obtained even after very short sieving times. The analytical sieve shakers of the series AS 200 are used in research & development, quality control of raw materials, interim and finished products as well as in production monitoring. The controllable electromagnetic drive offers an optimal adaption for every product. Sharp fractions are obtained even after short sieving times. The new Air Jet Sieve AS 200 jet is particularly suitable for sieve cuts of powdered materials which require efficient dispersion and desagglomeration. The option to store up to 10 SOPs and the automatic vacuum regulator (accessory) guarantees reproducible and meaningful results. LAUDA Aqualine AL 2
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
LAUDA Alpha RA 8
|
LAUDA Alpha RA 12
Cooling thermostat 230V;50Hz
Cat. No. LCKD1908
Article description:
Thermostatic bath/circulator with simplest operation and integrated cooling
system
1-line LED display for display of actual or set temperature
User-friendly menu guidance with simplest 3-key operation
Fully electronic continuous controller
Adjusted overtemperature protection (95 °C) for use with non-flammable liquids
Acoustic and visual alarms
Circulating pump with flow reduction
Cooling through intelligent energy saving system (compressor automatic)
Bath from stainless steel
Outlet connection at the rear
Technical data (according to DIN 12876)
Working temperature range -25 °C ... 85 °C
Temperature control ± 0,05 °C
Heater power 1,5 kW
Cooling capacity at 20 °C 0,325 kW
Pressure pump
- max. pressure 0,2 bar
- max. flow 15 L/ min
Bath volume max. 14,5 L
Bath opening (W x D x H) 300 x 190 x 160 mm
Overall dimensions (W x D x H) 365 x 500 x 605 mm
Standard accessories 1 bath cover
LAUDA Alpha RA 24
Cooling thermostat 230V;50Hz
Cat. No. LCKD1909
Article description:
Thermostatic bath/circulator with simplest operation and integrated cooling
system
1-line LED display for display of actual or set temperature
User-friendly menu guidance with simplest 3-key operation
Fully electronic continuous controller
Adjusted overtemperature protection (95 °C) for use with non-flammable liquids
Acoustic and visual alarms
Circulating pump with flow reduction
Cooling through intelligent energy saving system (compressor automatic)
Bath from stainless steel
Outlet connection at the rear
Technical data (according to DIN 12876)
Working temperature range -25 °C ... 85 °C
Temperature control ± 0,05 °C
Heater power 1,5 kW
Cooling capacity at 20 °C 0,425 kW
Pressure pump
- max. pressure 0,2 bar
- max. flow 15 L/ min
Bath volume max. 22 L
Bath opening (W x D x H) 350 x 290 x 160 mm
Overall dimensions (W x D x H) 415 x 605 x 605 mm
Standard accessories 1 bath cover
LAUDA Alpha A 12
Heating thermostat 230V;50/60Hz
Cat. No. LCBD0734
Article description:
Thermostatic bath with simplest operation
1-line LED display for display of actual or set temperature
User-friendly menu guidance with simplest 3-key operation
Fully electronic continuous controller
Fixed overtemperature protection (95 °C) for use with non-flammable liquids
Acoustic and visual alarm
Circulating pump with flow reduction
Bath from deep-drawn stainless steel
Electric connector for Through-flow Cooler DLK (On/Off/Automatic)
Optional cooling coil and pump circulation set available
Technical data (according to DIN 12876)
Working temperature range 25 °C ... 85 °C
- with external cooling -25 °C ... 85 °C
Temperature control ± 0,05 °C
Heater power 1,5 kW
Pressure pump
- max. pressure 0,2 bar
- max. flow 15 L/ min
Bath volume max. 12 L
Free bath opening (W x D x H) 235 x 161 x 200 mm
Overall dimensions (W x D x H) 270 x 332 x 420 mm
Standard accessories Flow reduction
- If required please also order Pump Circulation Set LCZE 005
- If required please also order Cooling Coil LCZE 004
LAUDA Alpha A 24
|
LAUDA ECO Bath 6 T
6 l, transparent polycarbonate bath
Cat. No. LCZ 0703
Article description:
חלון זה מכיל קישוריות למספר מכשירים.
על מנת לצפות במכשיר יש ללחוץ על הקישורית.
There is a series of transparent baths made of polycarbonate in order to view the objects being subjected to thermostating. They can be used up to 100 °C. The insulated baths made from stainless steel can be used up to 200 °C. All stainless steel baths are equipped with a built in drain tap. The outer jacket is made of powder-coated sheet steel.
LAUDA ECO Silver
Immersion thermostat 230V;50/60Hz
Cat. No. LCE 0227
Article description:
Immersion thermostat with latest microprocessor technology
Monochrome grafic LCD display for simultaneous indication of actual and set
value
Clear text menu navigation
Easy input via cursor and soft keys
Fully electronic continuous controller with PID action
Safety class III for operation with flammable and non-flammable liquids.
Over-temperature cut-out adjustable via menu
Vario pump with six adjustable performance levels
Easy control of the flow rate between internal and external circulation during
operation without contact with the bath
USB interface as standard
Upgradeable with an interface module (analogue module, contact module, RS
232/485 module, Profibus)
Upgradeable with Pt 100/LiBus module for external control and remote control
via Command console
Integrated programmer, 1 programme with max. 20 segments
With screw clamp for bath vessels with a wall thickness of up to 25 mm and an
immersion depth of min. 150 mm
Technical data (according to DIN 12876)
Working temperature range 20 °C ... 150 °C
- with external cooling -20 °C ... 150 °C
Temperature control ± 0,01 °C
Heater power 1,3 kW
Pressure pump
- max. pressure 0,55bar
- max. flow 22 L/ min
Immersion depth min. 150 mm
Usable depth min. 100 mm
Overall dimensions (W x D x H) 130 x 135 x 325 mm
Standard accessories 1 clamp
- If required please also order Pump Circulation Set with plastic nipples 13 mm
LCZ 0716
or Pump Circulation Set with M 16x1 metal nipples LCZ 0717
- If required please also order Cooling Coil LCZ 0720
LAUDA ECO Gold
Immersion thermostat 230V;50/60Hz
Cat. No. LCE 0228
Article description:
Immersion thermostat with latest microprocessor technology
Colored TFT display for simultaneous indication of actual and set values and
grafic illustration of the temperature profile
Clear text menu navigation
Easy input via cursor and soft keys
Fully electronic continuous controller with PID action
Safety class III for operation with flammable and non-flammable liquids.
Over-temperature cut-out adjustable via menu
Vario pump with six adjustable performance levels
Easy control of the flow rate between internal and external circulation during
operation without contact with the bath
USB interface as standard
Upgradeable with an interface module (analogue module, contact module, RS
232/485 module, Profibus)
Upgradeable with Pt 100/LiBus module for external control and remote control
via Command console
Integrated programmer with max. 150 segments, splitable in 5 programmes
Ramp function, timer
With screw clamp for bath vessels with a wall thickness of up to 25 mm and an
immersion depth of min. 150 mm
Technical data (according to DIN 12876)
Working temperature range 20 °C ... 200 °C
- with external cooling -20 °C ... 200 °C
Temperature control ± 0,01 °C
Heater power 2,6 kW
Pressure pump
- max. pressure 0,55bar
- max. flow 22 L/ min
Immersion depth min. 150 mm
Usable depth min. 100 mm
Overall dimensions (W x D x H) 130 x 135 x 325 mm
Standard accessories 1 clamp
- If required please also order Pump Circulation Set with M 16x1 metal nipples
LCZ 0717
- If required please also order Cooling Coil LCZ 0720
LAUDA ECO Bath 15 T
15 l, transparent polycarbonate bath
Cat. No. LCZ 0705
Article description:
LAUDA ECO Bath 20 T
20 l, transparent polycarbonate bath
Cat. No. LCZ 0706
Article description:
LAUDA ECO Bath 12 T
12 l, transparent polycarbonate bath
Cat. No. LCZ 0704
Article description:
A faultless and comparable analysis is closely linked to accurate sample handling. Only a sample representative of the initial material can provide meaningful analysis results. Rotating dividers ensure the representativeness of a sample and thus the reproducibility of the analysis.
The sample divider PT 100 divides the sample so exactly that the composition of each fraction of the sample corresponds exactly to that of the original bulk sample. This applies both for fine-powdered and coarse materials. The material feed and dividing processes take place automatically, without interruption and without loss of material. The Sample Divider PT 100 has a modular design and can be put together to suit individual requirements. It offers an extremely flexible range of possible applications. A feeder, various dividing heads, sample receptacle vessels and further useful accessories are available in addition to the drive unit.
A faultless and comparable analysis is closely linked to accurate sample handling. Only a sample representative of the initial material can provide meaningful analysis results. Rotary tube dividers ensure the representativeness of a sample and thus the reproducibility of the analysis.
The rotating tube divider PK 1000 is the prerequisite for dust-free division and volume reduction of larger bulk samples. It is suitable for powdered or granular bulk materials. The slot width adjusts the ratio of the fractions and therefore the amount of sample.
A faultless and comparable analysis is closely linked to an accurate sample handling. Only a sample representative of the initial material can provide meaningful analysis results. Sample splitters ensure the representativeness of a sample and thus the reproducibility of the analysis.
The sample splitters RT are ideal for the on-site reduction of sample material. They are easy to use, easy to clean and do not need an electrical power supply.
The dryer TG 200 is used in quality control, sample preparation and R&D departments. It permits the gentle drying of organic, inorganic, chemical or pharmaceutical bulk materials without localized overheating. Suitable materials can be coarse, fine, crystalline, fibrous or leafy. The powerful fan ensures optimal air throughput so that the products to be dried are loosened up and thoroughly mixed resulting in short drying times. With the interval operation the fluidized bed is mixed even better. Temperature, drying time and air volume can be set digitally and adjusted continuously.
Solid, high-quality pellets are an important precondition for reliable and meaningful XRF analysis. The PP 25 is a compact benchtop unit with particularly simple and safe operation. With a pressure force of 25 t it is ideally suited for the preparation of solid samples for XRF analysis. The pellets produced are of high quality and are characterized by their high degree of stability. The piston pressure can be read off from the clearly visible manometer scale. The dies for the Pellet Press PP 25 are available in several diameters and can be evacuated completely
Solid, high-quality pellets are an important precondition for reliable and meaningful XRF analysis. With the PP 40, RETSCH offers a pellet press which produces strong pellets with a smooth surface. The PP 40 features an individual pressure force regulation in the range of 5 to 40 t. Besides controlling the pressure force, it also determines the time of build-up, holding and release of force during pressing. This reduces the inner tensions of the sample and ensures that even difficult materials are pressed perfectly.
The vibratory feeder DR 100 is used for the uniform, continuous feeding and conveyance of pourable bulk materials and fine powders. The DR 100 feeds RETSCH mills, sample dividers, and particle measuring devices, and it is also suitable for other feeding tasks. Its performance, adaptability and compact design makes this device suitable for a great variety of applications. The DR 100 can also be driven and controlled externally via the built-in interface. RETSCH vibratory feeders guarantee reproducibly exact results and maximize the efficiency of downstream laboratory and testing devices.
RETSCHs product range includes three sizes of ultrasonic baths for cleaning test sieves and grinding tools quickly and easily. UR 1 is for test sieves up to 203 mm dia., UR 2 for test sieves up to 450 mm dia., and the UR 3 for the simultaneous cleaning of up to 5 test sieves 200/203 mm dia. The gentle yet thorough cleaning of test sieves in an ultrasonic bath increases their working lives as damage which could occur during manual cleaning is avoided.
|
Product Name |
MODEL |
| |
|
050101 |
JK-PH005 |
Measurement Range 0.0～14.0PH Dimensions152×29×15mm | |
|
050104 |
JK-PH008
|
Measurement Range 0.0～14.0PH Dimensions175×41×23mm | |
|
050107 |
JK-PHm-004 |
Measurement Range PH PH:0.00～14.00℃ ﹣9.9～99.9℃ F:16～210 F Dimensions208×200×76mm |
|
Product Name |
MODEL |
| |
|
050208 |
JK-con002 |
Conductivity Range 0~1999uS/cm Conductivity Accuracy ±1% F.S Resolution 1uS/cm Calibration Points 1 point Calibration Solutions 1408uS/cm | |
|
050224 |
JK-con-8303 |
Measurement Range0～1999 Us/Cm Elementary Error: ±2%F·S Range of Temperature Compensation: 0-60℃ Dimensions 175×41×23mm | |
|
050228 |
jk-tds-301 |
Measurement Range10-1990ppm Elementary Error: ±2%F·S Range of Temperature Compensation : 0-60 ℃ Dimensions152×29×15mm |
|
Product Name |
MODEL |
| |
|
070139 |
JK –BDO -35
|
Range of temperature control RT+10-250℃ Wave degree of temperature±1℃ Power1.2 KW Size of Working Room ( H×W×D )350×350×350 mm | |
|
070140 |
JK-BDO-45
|
Range of temperature control: RT+10-250℃: Wave degree of temperature: ±1℃: Power : 2 KW: Size of Working Room ( H×W×D ): 450×450×350 mm | |
|
070141 |
JK-BDO-55
|
Range of temperature control: RT+10-250℃ Wave degree of temperature: ±1℃: Power : 2.4 KW: Size of Working Room ( H×W×D ): 550×550×450 mm | |
|
070142 |
JK-BDO-75
|
Range of temperature control: RT+10-250℃ Wave degree of temperature: ±1℃: Power : 4 KW: Size of Working Room ( H×W×D ): 750×600×500 mm | |
|
070143 |
JK-BDO-100
|
Range of temperature control: RT+10-250℃ Wave degree of temperature: ±1℃: Power : 6 KW: Size of Working Room ( H×W×D ): 1000×800×800 mm |
|
Product Name |
MODEL |
| |
|
090302 |
JK –TEF -4 |
Nominalpower: 4: Rated temperature:1000 : Number of phases: Single: Temperature rising time of empty furnace(min): ≤80: Size of Working Room( D ×W×H )(mm): 300×200×120 | |
|
090303 |
JK – TEF - 8 |
Nominalpower: 4: Rated temperature:1000 : Number of phases: 3 Phase: Temperature rising time of empty furnace(min): ≤90: Size of Working Room( D ×W×H )(mm): 400×250×160 | |
|
090305 |
JK – TEF - 2.5A |
Nominalpower: 2.5: Rated temperature:1200 : Number of phases: Single: Temperature rising time of empty furnace(min): ≤120: Size of Working Room( D ×W×H )(mm): 200×120×80 | |
|
090307 |
JK – TEF - 10 |
Nominalpower: 10: Rated temperature:1200 : Number of phases: 3 Phase: Temperature rising time of empty furnace(min): ≤150: Size of Working Room( D ×W×H )(mm): 400×250×160 |
|
Product Name |
MODEL |
| |
|
120309 |
JK-PAUC-2210HP |
Operating frequency: 53 KHz: Power(W): 100: Adjustable Power: 40%~100% , Heater Power : 75w , Capacity(L): 3L, Tank Size(L*W*H)mm: 24*14*10cm Temperature ser range: 20℃~60 ℃ | |
|
120311 |
JK-PAUC-3310HP |
Operating frequency: 53 KHz: Power(W): 180: Adjustable Power: 40%~100% , Heater Power : 150w , Capacity(L): 6L, Tank Size(L*W*H)mm: 30*15*15cm Temperature ser range: 20℃~60 ℃ | |
|
120312 |
JK-PAUC-5210HP |
Operating frequency: 53 KHz: Power(W): 200: Adjustable Power: 40%~100% , Heater Power : 275w , Capacity(L): 10L, Tank Size(L*W*H)mm: 30*24*14cm Temperature ser range: 20℃~60 ℃ | |
|
120316 |
JK-PAUC-8210HP |
Operating frequency: 53 KHz: Power(W): 500: Adjustable Power: 40%~100% , Heater Power : 520w , Capacity(L): 22.5, Tank Size(L*W*H)mm: 50*30*15cm Temperature ser range: 20℃~60 ℃ |
|
Product Name |
MODEL |
| |
|
150118 |
JK -TW- 1.5A
|
Voltage (V/Hz) 220V/50Hz 110V/60Hz Pumping speed (CFM) 3 3.5 Ultimate Vacuun (Pa) 10 Power (hp) 1/4 Speed: (r/min) 1440 1720 Dimension (mm) 280×110×250 | |
|
150120 |
JK-TW-3A
|
Voltage (V/Hz) 220V/50Hz 110V/60Hz Pumping speed (CFM) 6 7.2 Ultimate Vacuun (Pa) 10 Power (hp) 1/2 Speed: (r/min) 1440 1720 Dimension (mm) 340×135×260 | |
|
150126 |
JK-2TW-4A
|
Voltage 220V/50Hz 110V/60Hz Pumping speed (CFM) 8 9.6 Ultimate Vacuun Rate (Pa) 5×10-1 Power (hp) 3/4 Speed: (r/min) 1440 1720 Dimension (mm) 425×155×280 |
Milling - Preparation of solid samples for analysis for optimized quality control and research.
Mills & Jaw Crushers
Sieving - Reproducible sieve analysis for high standards in quality control.
Sieve Shakers & Sieves
Assiting - Optimized working
procedures by increased efficiency.Sample Divider, Dryer, Pellet Press
Weltweit die richtige Temperatur
Wir bei LAUDA sind mit über 350 Mitarbeiterinnen und Mitarbeitern, über 60 Millionen Euro Umsatz und sieben Auslandsgesellschaften der weltweit führende Hersteller von innovativen Temperiergeräten und -anlagen für Forschung, Anwendungstechnik und Produktion sowie von hochwertigen Messgeräten. Durch die über 50-jährige Erfahrung und das einzigartige Produktprogramm vom kompakten Laborthermostaten über industrielle Umlaufkühler bis zum kundenspezifisch projektierten Heiz- und Kühlsystem mit über 400 Kilowatt Kälteleistung gewährleistet LAUDA seinen mehr als 10.000 Kunden weltweit als einziges Unternehmen die optimale Temperatur über die gesamte Wertschöpfungskette.
LAUDA Qualitätsprodukte halten Temperaturen bis zu beachtlichen 5 Tausendstel °C konstant oder verändern diese gezielt im Bereich von -150 bis 400 °C. Durch aktive Kühlung oder Erwärmung werden Produktionsprozesse beschleunigt oder erst ermöglicht. Dabei ersetzt LAUDA z. B. die unwirtschaftliche Kühlung mit Leitungswasser durch umweltfreundliche, preiswerte Geräte oder nutzt vorhandene Primärenergie, wie Abwärme. LAUDA Messgeräte bestimmen genau die Grenz- und Oberflächenspannung sowie die Viskosität von Flüssigkeiten.
Als hochspezialisierter Nischenanbieter belegt LAUDA in nahezu allen Zukunftsbranchen einen der beiden ersten Plätze. In der Halbleiterindustrie vertrauen sämtliche namhafte Hersteller und Lieferanten auf LAUDA Thermostate und Heiz- und Kühlsysteme. LAUDA Qualitätsprodukte ermöglichen ebenso die Erforschung und die Massenproduktion von lebenswichtigen Medikamenten. Im Wachstumsmarkt Medizintechnik kühlen von LAUDA hergestellte Umlaufkühler den Patienten und garantieren sichere Operationen am offenen Herzen. Bei Druckmaschinen, Spritzgießanlagen und Laserbearbeitungsgeräten kühlen LAUDA industrielle Umlaufkühler zuverlässig und kostengünstig. Weitere Hauptanwendungen sind Materialprüfung, Biotechnologie und die Kühlung von Laborgeräten und Maschinen. LAUDA Thermostate kommen selbstverständlich auch bei den hauseigenen Messgeräten zum Einsatz. Zur Bestimmung der Viskosität von Flugzeugtreibstoff unter realen Bedingungen in 10.000 Meter Höhe wird z. B. die Probe im Labor auf -45 °C abgekühlt.
Durch zahlreiche Innovationen und permanente Investitionen baut LAUDA seine hervorragende Marktstellung nachhaltig aus und wächst im Hauptmarkt Europa ebenso wie in Übersee.
LAUDA DR. R. WOBSER
GMBH & CO. KG
Postfach 12 51
97912 Lauda-Königshofen
Pfarrstraße 41/43
97922 Lauda-Königshofen
Deutschland
Telefon +49 (0)9343 503-0
Fax +49 (0)9343 503-222
E-Mail: info@lauda.de
PAC serves its customers with cutting edge technology and significant R&D resources to support its core technologies, including chromatography, elemental analysis, physical properties, fuels composition, and laboratory automation. VV
We're also a family of well-known and long-established leading product lines; AC Analytical Controls, ISL, Antek, PetroSpec, Alcor, Walter Herzog and Precision Scientific have for years been the backbone of best-in-class laboratories around the world, providing the basis for breakthrough product and process development. They have been the enabling technology behind innovation in industries such as refinery, petrochemical, biofuels, environmental, food and beverage, pharmaceutical, and more.
In fact, the dynamic synergy of unique technologies comprising the PAC family has led to the development of unique, cutting-edge instruments that have been inspired by combining the technological strengths of multiple product lines, benefits, and comparative technological strengths.
Our corporate strength is built upon the quality of our product lines, integrated into a powerful technology team, and backed by a relentless commitment to customer support, extensive process know-how, and the dynamic resources and bedrock strength that PAC provides. We're an industry leader in standards development, and we work tirelessly to establish benchmark procedures that scientists and analysts around the world rely on every day to build better products and a cleaner environment.
Our customer support centers are found in key locations around the world; we're dedicated to their success on the local level, providing process and applications knowledge in every language that our customers speak. PAC's extensive body of process knowledge and advanced analytical tools fuel discoveries on every continent, leading the way to greater productivity, a greener environment, and the realization of new visions for breakthrough industries.
Click here to download the PAC Corporate Brochure
GLASSCO LABORATORY EQUIPMENTS (LAB GLASS EXPORT DIVISION)
This is by far the biggest in the group of all the 3 companies and is one of the first companies to be formed in the group. Having a history of more than 40 years in the field of manufacturing lab glass. Glassco is the biggest expoter of scientific glassware from India, shipping more than 200 containers of glassware every year mainly Jointed, Volumetric, Filtration and General Glassware
|
|
|
GLASSCO LABORATORY INSTRUMENTS |
The company is primarily into selling of PLASTICWARE, METAL WARE, RUBBER WARE, LIQUID HANDLING products allied to the glassware field the idea of forming this company was to provide a one stop shop for customers to get all the three laboratory needs fulfilled by Glasssco.
Dragon Laboratory Instruments Limited, founded in 1992, has established its factory in
We currently focus on two product lines:
Liquid handling devices, including Semi & Fully Autoclavable Mechanical Pipettes (fixed and adjustable volumes), Pipette Filler, Pipette Controller, Stepper and Bottle-top Dispenser.
General lab instruments, including Stirrer, Shaker, Vortex, Overhead, as well as bench top Centrifuge.
We promote continuous research and development of lab equipments that meet the challenges of increasingly sophisticated research environments. Our technical expertise ensures that we provide data supported answers to technical questions. Our goal is to provide top quality products to fit the needs of each customer.
We also welcome OEM requests.
DOUBLE JACKET REACTORS UP TO 100
LITERS. ALL VESSELS IN GLASS AND
STAINLESS STEEL. THIN FILM AND
SHORT WAY EVAPURATORS. VALVES
WITH INTEGRATED PT-100 SENSOR,
WITH OR WITHOUT PNEUMATICAL
DRIVE
DIETREHANER STR. 297877
WERTHEIM GERMANY
ROFA is the leading company for the supply of automated Petroleum Testers in Eastern- and
ROFA - Laboratory & Prozess Analyzers Mag. Matthias Fiedler
Hauptstraße 145, Postfach 18, A-3420
Tel.: +43-2243-21 992, Fax: +43-2243-21 992-9
e-mail: office@rofa.at, internet: www.rofa.at
BOLA – Best performance for your lab.
If it’s a matter of quality we, as a manufacturing company, will not leave anything to chance.
BOLA stands for: Construction, production, quality assurance, storage and service – you will get the whole package. Many advantages which help to create smooth and efficient work processes in your lab.
More flexibility.
Your desires set our benchmark. Having design and production in house makes it possible to realise efficiently your requirements. We are open to any special requests. Please send us a drawing or sketch and our design department will start work. The custom-made item will meet all your requirements, of course.
More expertise.
We understand what you are talking about. We concentrate on materials, shapes, products’ properties as well as on the use under real conditions in the lab. Each of our products has been designed by ourselves, thoroughly tried and tested as well as continuously improved and adapted to your everyday requirements. Should you have any questions or requests, our professionals will give you expert advice. Who knows more about labware than the manufacturer?
More service.
Some enquiries are urgent. We are well prepared and keep the majority of our extensive product range in stock. Our efficient, well-established workflow assures shipment of your order at short notice. Waiting times and unnecessary shut downs can be prevented. You have no time to lose? We are here to help
QSIL is a leading supplier for the “special requests“ market. Our competence in manufacturing and fabricating fused quartz along with high flexibility and innovation for production and service is the basis for our continuing success. Stringent production quality control coupled with improvements achieved through constant development of new technology have on goal: completely meet customers needs with reliable high quality quartz products.
QSIL was founded in 1992 from the quartz division of the Ilmenauer Glassworks. A new fabrication plant in Langewiesen near Ilmenau was put into operation in 1996. This plant houses all production equipment for manufacturing of fused quartz products: raw material treatment, melting process, drawing towers, fabrication and quality control. Our quality management system was ISO 9001 certified in 1998.
In addition to manufacturing an extensive line of standard quartz products, QSIL is a leader in supplying custom designed products to specialized markets due to our extensive manufacturing flexibility. We pride ourselves in being able to respond to the needs of the specialty market segment by supplying custom made products as required.
In addition to manufacturing an extensive line of standard quartz products, QSIL is a leader in supplying custom designed products to specialized markets due to our extensive manufacturing flexibility. We pride ourselves in being able to respond to the needs of the specialty market segment by supplying custom made products as required.
TQC provide special purpose, innovative turnkey solutions for all industries. Systems successfully supplied include automatic assembly, test equipment and robotic handling solutions. TQC can design and supply the complete solution for customer requirements. Special purpose machines, leak testing machines, automated assembly or any other factory automation requirement is where TQC can help the customer.
Utilising over 20 years experience within the design and supply of industrial automation and testing equipment, the Nottingham based factory is the one stop shop for bespoke automated solutions.
TQC have successfully supplied factory automation and test machines to the automotive, medical, pharmaceutical and food industries.
. . . more than 40 years experience and innovation
. . . more than 40 years customer service and cstomer satisfaction
מערכות חימום, קירור וצ'ילרים תעשיתיים
יום עיון של חברת "משולם אבני ובנו" 
Mr. Marco Hauzer ,LAUDA
מר גיא דוידי, חברת משולם אבני ובנו בע"מ
מחזור 1 – 24.1.2012
מחזור 2 – 25.1.2012
מלון דיויד אינטרקונטיננטל ת"א
חב' משולם אבני ובנו בע"מ מקיימת יום עיון בנושא במערכות חימום וקירור תעשייתיות בהספקים גדולים המיועדים לפיילוטים ולתהליכי ייצור.
יום העיון מתקיים בחסות חברת LAUDA מגרמניה, יצרנית מס' 1 בעולם של אמבטיות טרמוסטטיות ומערכות חימום וקירור לתעשייה.
בתכנית:
הצגת מגוון המכשירים המסופקים ע"י חברת LAUDA, בדגש על תקשורת נתונים ומערכות מוגנות פיצוץ (EX.PROOF).
מרצה: Mr. Marco Hauzer ,LAUDA
הצגתה של חברת LAUDA ULTRACOOL מספרד, שנרכשה ע"י חב' LAUDA מגרמניה ומייצרת צ'ילרים (CHILLERS) במגוון גדול של הספקי קירור המיועדים לעבוד בסביבה חמה עד 50 מעלות צלסיוס.
ההשתתפות ביום העיון מותנית בהרשמה לכנס ישראנליטיקה 2012
למידע נוסף ולהרשמה אנא לחץ כאן
Meshulam Avni
קישור לסירטון תערוכה
צפייה בסרטון
Mixer Mill MM 400 |
 |
|
Feed material: hard, medium-hard, soft, brittle, elastic, fibrous Material feed size*: ≤ 8 mm Final fineness*: ~ 5 µm Setting of vibrational frequency: digital, 3 - 30 Hz (180 - 1800 min-1) |
חברת משולם אבני ובנו בע"מ נוסדה בשנת 1968 ע"י מר אבני משולם.
בשנת 1982 הפכה החברה לחברה בע"מ, החברה מספקת ציוד למעבדות, לתעשייה ולמוסדות מחקר.
כמן כן החברה מספקת שירותי אחזקה וכיול למערכות שונות (בעיקר למוצרים שאותם מוכרת החברה).
החברה מחויבת לשיפור מתמיד של איכות שירותיה והנה מוסמכת משנת 1997 לתקן 9000-2008 ISO מטעם מכון התקנים הישראלי.
משרדי החרה ומחסניה ממוקמים בנשר (ליד חיפה) ומוקדי שירות נוספים נמצאים ברמת גן ובבאר שבע החברה מחזיקה צוות מהנדסי שירות מיומנים.
לחברה חוזי שירות שנתיים עבור מוצרי החברה ומוצרים שונים בענף.
החברה מייצגת בלעדית חברות מהטובות בעולם בתחומם ממדינות ארה"ב, גרמניה, צרפת, ספרד, סין, הולנד ועוד.
החברה ממוקמת ברח' תעשיה37 נשר 36603 ת.ד 357 נשר, 36603 טל' רב קווי: 04-8219989 פקס: 04-8216146
-
מייל: INFO@AVNI-SON.CO.IL
-
מייל שירות עבור חב' אינדיגו: AVNI.SERVICE@GMAIL.COM